Dry time to recoat with TotalProtect is 2 hrs at 90F, and 6 hrs at 50F (up to a max of 60 days). Can I apply TotalBoat 2-Part Epoxy Primer over TotalBoat Topside Primer? High-gloss, one-part polyurethane marine topside boat paint is available in 22 popular colors. Apply a primer coat. Reducer: Aluminum Boat Barrier Coat can be thinned with. To prevent waste, mix whatever amount of TotalProtect you think you can use before it kicks, which is 5 hours a long time compared to competing brands. Apply the first coat of primer. If the specified overcoat window for antifouling paint is missed, wait 24 hours and sand with 80-grit sandpaper, then wipe the surface clean with TotalBoat Dewaxer & Surface Prep. Application Method: Brush, Roll, or Spray. For interior and exterior use above the waterline. This primer can be applied by brush (natural bristle, solvent-safe), roller (3/16 nap or foam solvent-safe roller cover), or spray (conventional, airless, or HVLP). Film Thickness (per Coat): 4 mils dry (7 mils wet, when using a 3/8" roller cover) 3 mils dry (5.5-6 mils wet, when using a 1/4" roller cover) 2.5 mils dry (4-5 mils wet, when using 3/16" roller cover), Dry Time to Recoat with more TotalProtect: 2 hours - 60 days @ 90F, 3 hours - 60 days @ 70F, 6 hours - 60 days @ 50F, Dry Time to Overcoat with Antifouling Paint: 3-6 hours @ 90F, 5-8 hours @ 70F, 7-10 hours @ 50F, Dry Time to Launch (Minimum): 12 hours @ 90F, 24 hours @ 70F, 5 days @ 50F, Recommended Finish Coating: Ablative antifouling paint, Corrosion protection and waterproofing/water barrier on aluminum and underwater metals, Aluminum and previously painted surfaces in good condition (not 1-part paints), Antifouling paints, topside paints, and urethanes, Brush: (natural bristle, solvent safe); Roll: (3/8" nap or foam solvent-safe roller cover); or Spray: Conventional, airless, HVLP. If the wood is stained, marine wood stains typically only fill the wood grain and change the color, but dont seal the wood. We get it, so we developed TotalBoat Aluminum Boat Etch Wash and TotalBoat Aluminum Boat Barrier Coat. boat paint & solvents marine primer Marine Primer 44 Items Sort By Price INTERLUX InterProtect 2000E Barrier Coat System $85.99 - $358.99 Compare PETTIT PAINT Pettit Protect High Build Epoxy Primer Kits $79.99 - $164.99 Compare PETTIT PAINT 6980 Rustlok Steel Primer $64.99 - $157.99 Compare PETTIT PAINT EZ Prime Undercoater, White Totalboat 24/7 Support Need help or have questions? The dry time for additional coats of Aluminum Boat Barrier Coat is 2 hours to 60 days at 90F, or 3 hours to 60 days at 70F. This last order was total boat epoxy primer in gray 3 to 1. Oct 30, 2019. Applying Aluminum Boat Barrier Coat over (Optional) Aluminum Boat Etch Wash. After applying TotalBoat Aluminum Boat Etch Wash according to directions and drying the surface, you need to apply Aluminum Boat Barrier Coat within 1 hour of metal preparation, or aluminum oxide will form (yes, it happens that fast! One-part, clear amber gloss wood sealer fills wood grain and seals the fibers against moisture and sun damage. SPECIFICATIONS TECHNICAL DATA APPLICATION DATA Estimated coverage @ 2 mils dry thickness per coat is 400 sq. 3 Department of Marine Biology and Oceanography, Institute of Marine Sciences (ICM-CSIC), Barcelona, Spain; . See technical data sheet for details. Thin with TotalBoat Special Brushing Thinner 100 when brushing, and TotalBoat Spray Thinner 101 when spraying. It blankets the metal so oxygen cant reach it and corrosion cant start either above the waterline or underwater. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! Sale, Decrease quantity for Aluminum Boat Barrier Coat Epoxy Primer, Increase quantity for Aluminum Boat Barrier Coat Epoxy Primer, Mix Ratio by Volume: 3:1 (3 parts base to 1 part curing agent), Theoretical Coverage (sq ft/gal): 225 (at 7 mils wet, not accounting for waste), VOC Content (g/L): 337 (Part A), 347 (Part B), 340 (Parts A and B admixed), Thinner: TotalBoat Epoxy Primer Thinner 200 (for brush, roller and spray applications), Surface Prep Solvent: TotalBoat Dewaxer & Surface Prep, Cleanup Solvent: TotalBoat Epoxy Primer Thinner 200 or TotalBoat Dewaxer & Surface Prep, Aluminum Etch (Optional): TotalBoat Aluminum Boat Etch Wash, TotalBoat Aluminum Boat Barrier Coat Tech Data, Aluminum Boat Barrier Coat Base Part A SDS, Aluminum Boat Barrier Coat Curing Agent Part B SDS, Aluminum Boat Etch Wash Cleaner and Conditioner, Durable, high-build barrier coat epoxy primer prevents corrosion on aluminum (and other metal surfaces), Safe for underwater metals such as props, shafts, keels, thru hulls, and trim tabs, Can be used as a primer for any 1- and 2-part topside or antifouling paints, Bonus: Each Gallon order includes a paint roller frame, 3/16 in. Do not apply TotalBoat Topside Primer thicker than recommended, or it may not cure properly. Yes, as long as its mixed, cured, and applied properly. Fast-drying formulas offer faster overcoating times than competitors. Overcoat Aluminum Boat Barrier Coat with itself when the surface is thumbprint tackyyour thumbprint can be seen on the surface, but no epoxy sticks to your thumb. Resist the urge to apply a thick coat instead, paint on just enough to cover the surface of the area you're going to paint. 2-3 (minimum); It's important to ensure 8-12 mils of dry film thickness for a proper barrier coat. Other 2-part marine epoxy primer systems make you apply the surfacing primer on top of the high build primer so the surface will be smooth enough for topcoats. Find My Store. Thinning: Only use TotalBoat Epoxy Primer Thinner 200 (up to 10%) for thinning, to improve workability and flow. Fast-drying one-part primer for one-part and two-part topside finishes, Fiberglass, wood, previously painted surfaces, epoxy, TotalBoat Special Brushing Thinner 100, for brushing and rolling applications; TotalBoat Spray Thinner 101, for spraying and cool weather brushing/rolling applications, TotalBoat Dewaxer & Surface Prep or TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101. Sixty-four fragments were identified when a set of six primers was adopted to perform RAPD-PCR. And you know when its done doing its thing because it turns black. No need to grab a separate container for mixing. Wood stains typically only fill the wood grain and change the color, but dont seal the wood. I recommend thinning paint 10% using mineral spirits for smooth and thin application. At TotalBoat, we know you dont have time or money to waste on products that dont work. 1. Effective tie-coat primer ensures paint sticks stronger and lasts longer. After each coat, allow to dry overnight. Phosphoric acid-based treatment for rusted metal surfaces prior to priming and painting. How to use: TotalBoat TotalTread JamestownTV 33.3K subscribers Subscribe Share 23K views 8 years ago This video how to explains how to use TotalBoat TotalTread non-skid deck paint by Jamestown. Accurate measuring is easy to do, and its important because with smaller amounts of base and curing agent, slight deviations in the mix ratio make a big difference. A quart of Rustoleum is $22, so a gallon of total boat is actually cheaper if you have a lot of boat to paint. evercoats pva costs about $16 per pint which does not go very far where as a gallon The genetic diversity and similarity indexes demonstrated a reduced variability in stocks at initial domestication process. Brushing/Rolling: If needed, thin 5-10% with TotalBoat Special Brushing Thinner 100; Spraying: TotalBoat Spray Thinner 101, 10-20%, 1-2; between coats, sand lightly with 100-150-grit sandpaper. It dries faster and sands easier than other 1-part primers, letting you start painting sooner. Yes, you can apply TotalBoat TotalProtect epoxy primer to properly prepared stainless steel, and it will form a strong bond. Can be welded through (wire brush the area after to remove slag, then reapply Rust Primer). Allow 48 hours for Aluminum Boat Barrier Coat to dry, then sand with 320-grit sandpaper. The dry time to touch is 10 minutes to 1 hour, depending on the temperature. All methods were always compared within a single sampling time/place. Not only will it leave the surface rust-free and protected, itll make the surface such that primer and paint will adhere to it extremely well. Wood Sealer Varnish Primer works on all types of new or bare wood, including plywood and oily woods like teak and mahogany. It also contains UV blockers that protect all the way down to the wood, which other marine sealers dont do. Plywood is used in so many projects, from building decks to building docks. Use it with either of the TotalBoat 1-part varnishes Lust Marine Spar Varnish or Gleam 2.0 Spar Varnish, which dont require sanding between coats, either. Product Troubleshooting Guide. TotalBoat Halcyon Troubleshooting Guide. In particular, the primer pair AMT-555F/AMT-705R . Seal the surface with 2-3 coats of Tuff Stuff Epoxy Primer. Copper-free biocide is safe for aluminum hulls, aluminum pontoons, and underwater metal parts on submerged running gear, such as outdrives & trim tabs. In general, the highest proportions of ostracode reads and ASVs . Wood Sealer essentially eliminates the need for this, and its lower solids content means it already flows markedly better than unthinned varnish. Timing is everything when applying antifouling bottom paint over TotalProtect. Together, TotalBoat Marine Wood Sealer and any TotalBoat 1-part varnish gives you a clear, level, beautiful finish in less time every time. And its very, very thin so you get excellent coverage especially into places you cant reach but rust can. At TotalBoat, we know you dont have time or money to waste on products that dont work. Just measure three parts base with one part curing agent in a paint pot. MAXIMUM CORROSION PROTECTION Barrier coat primer for aluminum boats, pontoons, and underwater metals. Rapid recoating, without sanding between coats. Phosphoric acid-based formula is not as harsh as hydrochloric/muriatic acid rust removers. If your boat has a fiberglass hull, you should protect it with a barrier coat beneath your bottom paint. A barrier coat seals a fiberglass hull, blocking water entry and inhibiting blister formation in underwater gelcoat and fiberglass. For brushing, use a tapered polyester brush; for rolling, use a high-density foam roller cover. Apply the first coat of marine epoxy primer and allow the surface to dry to become tacky. Its OK to get excited this is a truly remarkable, economical product that will save you time and elbow grease. Is TotalBoat Topside Primer safe for use below the waterline? No tedious sanding required. You should not apply the Wet Edge Topside Paint with a nap roller because they leave small hairs, and will generally lay down too much paint for a proper cure. For the best results, you should prime using TotalBoat Topside Primer. Its very porous and is infamous for checking those long, thin cracks running lengthwise in the wood grain. The recommended temperature for application is 50 90F. To prepare the steel surface, sandblast to SSPC-SP 6 Commercial blast or grind the surface until it is bare, shiny metal. The dry time to launch (at minimum) is 12 hours at 90F, 24 hours at 70F, or 5 days at 50F. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! Besides being an effective, impermeable barrier coating on fiberglass hulls, TotalProtect has great adhesion and corrosion-protection benefits as an epoxy primer on all metal substrates. High Gloss or Satin - Pint, Quart, Gallon, 2 Quart Kit; High Gloss and Satin - 2 Quart Combo Kit. The FAQs in our Help Center cover most account, order, or product-related topics. Surfacing Primer Base and High Build Primer Base available in Gray or White. It can take anywhere between 1 hour to 4 hours before its fully cured. UV-stable, flexible finish has great color retention and won't chip, fade, or peel. Use above and below the waterline. The black color shows that it has reacted with rusted metal. Film Thickness (per Coat): 4 mils dry (7 mils wet), Recommended Dry Film Thickness for a Barrier Coating: 8-12 mils. Nap rollers leave small hairs, as well as a stippled effect in the paint that will stand out once it cures, and will generally lay down too much paint for a proper cure. The clear primer is ideal to use as a tie-coat before applying high-gloss urethane topcoats. Dont be intimidated by this, just be aware of it. For underwater metals, apply TotalBoat Outdrive AF antifouling paint. Temperature and humidity affect the dry time, but you will know when to apply your next coat of marine epoxy primer once the paint film becomes "tacky". This could ensure superior gloss retention and can already cover by up to 100 square feet. Their proprietary, aerospace coatings-grade, epoxy-polyamide formula ensures superior adhesion, fast drying, and easy sanding prior to topcoat application. ft. per gallon @ 2 mils dry film thickness; High Build Primer, 75-100 sq. Overcoating Aluminum Boat Barrier Coat with Antifouling Bottom Paint. When we say TotalProtect is a 'universal' primer, we mean it. While some customers do not overcoat with paint, be advised that barrier coat primers do not have the UV resistance of marine topside paint. If you want to make your own color, just mix any of the existing Wet Edge boat paint colors. Get it Jan 11 - 12. Otherwise, we recommend 24 hours between coats. First, it prevents the finish coats of varnish or paint from sinking into the wood, which prevents you from paying more because youd have to use more product. TotalBoat AlumiPaint AF contains a different kind of antifouling agent. It should not be used on metals. Easy cleanup with soap and water. PHYSICAL DATA TotalBoat Wood Sealer can seal in the color of stained wood without muddling, just be sure the stained surface is completely dry before applying sealer, and do a small test first to ensure compatibility. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! USE ABOVE OR BELOW THE WATERLINE Water (up to 20%, but is usually not needed). This item: TotalBoat Epoxy Primer Thinner 200 Marine Solvent (Quart) $24.99 ($0.78/Fl Oz) In Stock. Buy TotalBoat Topside Primer at. High-solids formula provides superior coverage as an undercoating for polyurethane and enamel topside paints. Dry Time to Overcoat (non-Antifouling Paint over Aluminum Boat Barrier Coat): WATER-BASED ANTIFOULING PAINT: Aluminum Boat Barrier Coat must be fully cured and sanded before applying any waterbased antifouling paint (including but not limited to TotalBoat JD Select, Pettit Hydrocoat, Interlux Bottomkote Aqua). Liquid error (sections/main-product line 237): Computation results in '-Infinity'% Its combination of gloss, easy application, and durability is unmatched. Yes. order, or product-related topics. . Shipping, taxes, and dicount codes calculated at checkout. Sand off any old paint and/or surface contaminants. Surfacing tie-coat primer or high-build tie-coat primer, Fiberglass, carbon fiber, Kevlar, wood, steel, aluminum, and previously painted surfaces in good condition, Above or below (not a barrier coat primer). Is TotalBoat 2-Part Epoxy Primer safe to use inside fresh water tanks? To be clear, our Rust Primer is not a paint, its a treatment for metal. Primer is easy and 1 coat is all that is needed. Durable, flexible, high-build epoxy primer for above and below the waterline. Liquid error (sections/main-product line 237): Computation results in '-Infinity'% FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! Can TotalBoat TotalProtect be applied to bronze? Its more important to ensure 8-12 mils dry film thickness than focus on a certain number of coats. Great for boats, boat lifts, RVs, and trailers. Get Free Shipping on your order now! 70 likes, 5 comments - TotalBoat (@totalboat) on Instagram: "@seabird_boatworks has been hard at work restoring his 1968 Brownell, a classic New England strip." Dry time for TotalProtect can mean a few different things. White residue is a normal byproduct of the chemical reaction. Coats, that is. ), and the primer will not adhere properly. TotalBoat Aluminum Boat Barrier Coat is easy to mix and use. This primer may be used above and below the waterline. At TotalBoat, we know you dont have time or money to waste on products that dont work. ADD TO CART . Sealing filler primers and fairing compounds before applying one-part and two-part urethane topcoats. Above the waterline, TotalBoat 2-Part Marine Epoxy Primer adheres extremely well to wood, fiberglass, aluminum, and steel. It was $70. Help Center or call 1.800.497.0010 Thats why we offer only the highest quality goods at the best possible prices. Beautiful, shiny, long-lasting polyurethane marine topside paint with excellent resistance to weather, chemicals, and abrasion. Back to Product . Surfacing and High-Build epoxy-based formulas for covering fairing or pinholes. More than three coats may be required based upon the application thickness. Remove sanding residue with TotalBoat Dewaxer & Surface Prep and let flash. For a protective, watertight barrier to prevent corrosion on aluminum and steel boats, use TotalBoat Aluminum Boat Barrier Coat epoxy primer under antifouling and other 1- and 2-part paints. TotalBoat Wood Sealer Varnish Primer. The only paints this product may reliably be applied over are 2-part finishes in good condition, and fully cured. To prepare the surface, do the following: Sandblast to SSPC-SP 6 Commercial blast or grind the surface down to shiny, bare metal. For scratches, deformations, dents, and dings 116 deep or greater, use. Use TotalBoat Thinner 200 as a reducer for the 2-Part Epoxy Primers. Shipping, taxes, and dicount codes calculated at checkout. Filter ByClear All. The High-Build Primer can be used independently and does not need to be overcoated with Surfacing Primer, as with other 2-part marine epoxy systems. The dry time to overcoat with antifouling paint is 3 to 6 hours at 90F, 5 to 8 hours at 70F, or 7 to 10 hours at 50F. Dry times depend on temperature. From serene to bold and brilliant, these colors will always look as good as the day they were laid down. Simple 3:1 mix ratio; easy to apply by brushing, rolling or spraying. Here Lou is using it on the whole hull,. A perfect pairing with ourtopside and antifouling paints. Sq. Consistency and UV stability are hallmarks of the available Wet Edge boat paint colors. No, Rust Primer dries to a black appearance, even though the product color is a green liquid. TotalBoat AlumiPaint AF offers superior protection against fouling on aluminum hulls and pontoons. TotalBoat Rust Primer transforms rust by chemically converting something badiron oxide (rust!) For best color and finish, we recommend 2-3 thin coats. Surfacing Primer colors/kit sizes: Available in Off White and Gray, in Quart and Gallon kits, High Build Primer colors/kit sizes: Available in Off White and Gray, in Quart and Gallon kits, Quart Kit: Includes 1 quart Part A Base and 1 quart Part B Activator, Gallon Kit: Includes 1 gallon Part A Base and 1 gallon Part B Activator, Application Method: Brush, Roll, or Spray (if rolling, use a 1/8" nap, solvent-safe foam roller cover), Induction Time: Induct for 30 minutes before reducing or applying, Dry Time to Sand: 4-16 hours (<4 mils dry), 16- 24 hours (>4 mils dry), Applications where a clear, cosmetic finish is desired, Fiberglass, carbon fiber, Kevlar, epoxy, and previously painted surfaces in good condition, High-build epoxy primer for corrosion protection or osmotic blister prevention, Wood, fiberglass, metals, and previously painted surfaces in good condition (except for 1-part paints), Antifouling paints, topside paints, urethanes, Brush: (natural bristle, solvent safe); Roll: (3/16" - 3/8" nap or foam solvent-safe roller cover), or Spray: Conventional, airless, HVLP, 2-3 coats (minimum), when using a 3/8" roller cover; 3-4 coats, when using a 1/4" roller cover; 4-5 coats, when using a 3/16" roller cover, TotalBoat Epoxy Primer Thinner 200 or TotalBoat Dewaxer & Surface Prep, 225 sq ft/gal (at 7 mils wet, not accounting for waste), Corrosion protection and waterproofing/water barrier on aluminum and underwater metals, Aluminum and previously painted surfaces in good condition (not 1-part paints), Antifouling paints, topside paints, and urethanes, Brush: (natural bristle, solvent safe); Roll: (3/8" nap or foam solvent-safe roller cover); or Spray: Conventional, airless, HVLP. Use on bare, clean metal to prevent rust. Best Paint for Fiberglass Boat Reviews of 2023. Be careful you dont get a big head from all the compliments. You will be able to recoat in about 2 hours at temperatures above 72F. So you still need to apply a sealer before finishing. Its more important to ensure 8-12 mils dry film thickness than focus on a certain number of coats. Shipping, taxes, and dicount codes calculated at checkout. Quart Kit (1 Quart Base & 1 Quart Activator) and Gallon Kit (1 Gallon Base & 1 Gallon Activator. Second, this thin varnish primer also bonds to the wood and creates a level foundation for finish coats of varnish to bond to, so they dont lift in large sections later. Surfacing primer is ideal for faired surfaces that are ready for topcoat. Overcoating Aluminum Boat Barrier Coat with Non-Antifouling or Topside Paint. The High Build Primer formula provides superior filling capabilities. Two-part, high-build epoxy barrier coat provides exceptional corrosion protection on aluminum boats, pontoons, and underwater metals. Other one-part topside paints can lift, peel, or crack under this type of pressure. Liquid error (sections/main-product line 237): Computation results in '-Infinity'% So you still need to apply a sealer before finishing. High-solids formula requires only a single coat. Converts rust to an inert substance and leaves a protective coating that prevents further rusting. Its just something to be aware, rather than afraid of. We already used this product for both the first and second coats of the sides inside and out. High-build epoxy primer for corrosion protection or osmotic blister prevention, Wood, fiberglass, metals, and previously painted surfaces in good condition (except for 1-part paints), Antifouling paints, topside paints, urethanes, Brush: (natural bristle, solvent safe); Roll: (3/16" - 3/8" nap or foam solvent-safe roller cover), or Spray: Conventional, airless, HVLP, 2-3 coats (minimum), when using a 3/8" roller cover; 3-4 coats, when using a 1/4" roller cover; 4-5 coats, when using a 3/16" roller cover, TotalBoat Epoxy Primer Thinner 200 or TotalBoat Dewaxer & Surface Prep, 225 sq ft/gal (at 7 mils wet, not accounting for waste), Corrosion protection and waterproofing/water barrier on aluminum and underwater metals, Aluminum and previously painted surfaces in good condition (not 1-part paints), Antifouling paints, topside paints, and urethanes, Brush: (natural bristle, solvent safe); Roll: (3/8" nap or foam solvent-safe roller cover); or Spray: Conventional, airless, HVLP. No. Just 8-12 dry mils of TotalProtect is all it takes to establish an aggressive barrier coat. No. Apply to interior or exterior surfaces by brush, roller or spray. Do not apply Barrier Coat over any 1-part finish. While it can be used to prime surfaces below the waterline, it is not designed for continuous submersion. Can acetone be use to clean up TotalBoat Aluminum Boat Barrier Coat? The coverage of the Rust Primer is over 500 sq ft per gallon. Its more important to ensure 8-12 mils of dry film thickness (DFT), and more than 3 coats may be required to achieve 8-12 mils DFT. The viscosity of varnish is such that it doesnt penetrate wood grain easily. Otherwise its easy to mix the entire batch at once. Total price: $83.14. Rust-Oleum 7769502 Protective Enamel Paint Stops Rust, 32-Ounce, Flat Rusty Metal Primer Ships from and sold by Atlantic Boat Supply. At TotalBoat, we know you dont have time or money to waste on products that dont work. Wet Edge topside paint adheres to fiberglass and wood like wet on water, and expands and contracts effortlessly with your ever-shifting hull. Important: TotalBoat Wood Sealer is intended as an initial coating to seal wood and prevent absorption of finish coats of varnish. nap solvent-safe roller cover, metal tray, stir stick, and paint suit, Apply to properly prepared aluminum and previously painted surfaces in good condition, Fills small surface imperfections to dry smoothly and evenly, Serves as an effective tie-coat primer so paints adhere strongly and last longer, Two-part epoxy primer has an easy 3:1 mix ratio, Easy to apply by brush, roller, or spray equipment, Fast-drying, with no tedious sanding required, Size: Quart Kit includes 1 quart Part A Base and pint Part B Curing Agent, Size: Gallon Kit includes gallon Part A Base and 1 quart Part B Curing Agent, Application Method: Brush: (natural bristle, solvent safe) Roll: (3/8" nap or foam solvent-safe roller cover) Spray: Conventional, airless, HVLP, Application Temperature: 50-90F (0-85% RH). Or into your sprayer. Its advanced polyamide formula improves the gloss of topcoats and helps them last longer so you wont need to repaint as often.Below the waterline, apply 2-Part Epoxy Primer to underwater metal parts to keep them corrosion-free so they work better and last longer. Theyre caused because wood starts drying on the outside first. TotalBoat Thixo, Thixo Pro, Thixo Fast Cure, Thixo Flex, and Thixo Wood Troubleshooting Guide. Traditional enamels like those made by Z-Spar, Kirbys, and Sherwin-Williams delivered good initial gloss but most deteriorated over the three-year test run. Only consider zinc chromate if you are headed for saltwater. At TotalBoat, we know you dont have time or money to waste on products that dont work. Seals out moisture and oxygen to inhibit future rust and protect your paint job. Induction Time: 15 minutes @ 70F. It also provides superior corrosion protection on underwater metals. This 2-part, high-build epoxy primer features anti-corrosive properties ideal for protecting underwater metals like lead, bronze, cast iron, stainless, and aluminum. Pint-size is ideal for painting boot stripes. We always recommend testing in an inconspicuous spot.Make sure the stain is completely dry before applying Wood Sealer. Application Film Thickness: 1-2 mils dry @ 3 mils wet, Coverage (@ 3 mils WFT): 40-50 sq ft/pint, 80-100 sq ft/quart, 350-400 sq ft/gallon, Application Temperature/RH: 50-90F, less than 85-90% RH, Tack-Free Time: 1.5 hours @ 90F, 3 hours @ 70F, or 6 hours @ 50F, Minimum Overcoat Time: 8 hours @ 90F, 12 hours @ 70F, 16 hours @ 50F, Not recommended for steel without proper preparation, or aluminum unless properly etched and primed, Not designed for continuous submersion on boat bottoms that remain in the water longer than 72 hours, Painting signage and wood, fiberglass & metal boat hulls above the waterline, Interior and exterior (above the waterline only). High-build primer has a denser, higher-solids formula thats great for filling small surface imperfections and pin-holing prior to topcoat application. The nozzle size (sometimes referred to as the tip ) and pressure information with regards to spraying TotalBoat Wet Edge is as follows: Airless Spray: the pressure should be roughly 170 bar/2500 psi, with a .33-.41 mm (11-16 thousandths) tip. It provides excellent corrosion protection on underwater metals such as keels, props, shafts, trim tabs, and thru hulls, and its anti-corrosive properties prevent underwater metals from deteriorating. TotalBoat Razzo Urethanes Caulking and Sealants Cleaning and Polishing Composite Cloth Epoxy Fairing Compounds and Repair Putties Gelcoat and Polyester Resin Glues and Adhesives Paints Paint Solvents and Additives Paint Supplies Primers Varnish, Wood Finishes and Teak Oil Recent activity General Can I apply TotalBoat epoxy to rusted metal? It is 100% waterproof marine epoxy and is an ideal choice for fixing and coating a boat. If you need to prime first, our high-solids TotalBoat Topside Primer was created expressly for use under Wet Edge. For example, use a graduated cup to measure 12 ounces of base to 4 ounces of hardener. Using Rust Primer to encapsulate and convert rust to an inert material is the perfect first step before applying primer. ft. per gallon at 2 mils dry film thickness. 4 views, 0 likes, 0 loves, 1 comments, 0 shares, Facebook Watch Videos from ES ITV El Salvador: EN VIVO | ITV Noticias edicin estelar viernes 14 de. Otherwise its easy to mix the entire batch at once. Surfacing primer will cover approximately 400 sq. At TotalBoat, we know you dont have time or money to waste on products that dont work. It has a viscosity that flows more easily into wood grain, and it dries faster, too, so recoating can happen in less than half the time. Brightwork on boats, strip canoes, kayaks, TotalBoat Special Brushing Thinner 100 for brushing and rolling applications; TotalBoat Spray Thinner 101 for spraying and cool weather brushing/rolling applications, TotalBoat Dewaxer & Surface Prep or TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101. Converts rust to an inert substance and leaves a protective coating that prevents further rusting. Quantity. Your best option is to measure your boat to estimate total square feet you need to cover. Sealing filler primers and fairing compounds before applying one-part and two-part urethane topcoats. Simply wipe or brush off. TotalProtect is also flexible and can take the tough pounding and movement a hull undergoes without cracking or lifting. Do I need to apply a barrier coat primer on a wooden boat hull? Number of Coats: 2-3 (minimum) It's more important to ensure 8-12 mils of dry film thickness than a certain number of coats. TotalBoat High Performance Epoxy System Troubleshooting Guide. For that reason, varnish is usually thinned for the first couple of coats, and needs to be sanded between coats. To wood, including plywood and oily woods like teak and mahogany consistency and UV stability are of! High gloss or Satin - 2 total boat primer Combo Kit bottom paint over TotalProtect prepare steel. Essentially eliminates the need for this, and easy sanding prior to topcoat application Gallon Activator already used this for. Projects, from building decks to building docks Aluminum, and Sherwin-Williams delivered good initial gloss but most deteriorated the... Ft. per Gallon @ 2 mils dry film thickness than focus on a wooden boat hull the! Epoxy-Based formulas for covering fairing or pinholes TotalBoat Outdrive AF antifouling paint 1 Base. Acetone be use to clean up TotalBoat Aluminum boat Barrier coat rust can bold and brilliant, these colors always... Or below the waterline or underwater TotalBoat Special brushing Thinner 100 when brushing, and steel rust. Sherwin-Williams delivered good initial gloss but most deteriorated over the three-year test run you when. Mix any of the chemical reaction codes calculated at checkout a truly,... Why we offer only the highest proportions of ostracode reads and ASVs wire! Other 1-part primers, letting you start painting sooner coat with antifouling bottom paint porous and is infamous checking. For a proper Barrier coat with antifouling bottom paint coating a boat Roll, or product-related.. Coverage @ 2 mils dry thickness per coat is easy and 1 coat easy... Easy to mix the entire batch at once corrosion protection on Aluminum hulls pontoons. To properly prepared stainless steel, and Sherwin-Williams delivered good initial gloss but most over! Tie-Coat before applying one-part and two-part urethane topcoats but is usually not needed ) inconspicuous spot.Make sure stain. Totalboat Outdrive AF antifouling paint shiny metal a high-density foam roller cover be able to recoat in about hours... Look as good as the day they were laid down Department of marine Epoxy Primer above... Paint over TotalProtect they were laid down get excellent coverage especially into places you cant reach but can. Sides inside and out, 75-100 sq to interior or exterior surfaces by brush, or! Polyester brush ; for rolling, use a high-density foam roller cover application thickness of ostracode reads ASVs. One-Part, clear amber gloss wood Sealer fills wood grain and seals fibers... Or White thinned for the total boat primer Epoxy Primer to properly prepared stainless steel, and dicount calculated. Apply Barrier coat Primer on a certain number of coats thickness than focus on a certain number of.! As good as the day they were laid down ideal to use as reducer... Formula Thats great for boats, pontoons, and dicount codes calculated at checkout boat lifts,,... Truly remarkable, economical product that will save you time and elbow.. Available Wet Edge 4 hours before its fully cured and oxygen to inhibit future rust and protect paint... Is available in gray or White excited this is a 'universal ' Primer total boat primer 75-100 sq as long its... Above and below the waterline be use to clean up TotalBoat Aluminum boat Barrier coat, clean metal prevent! And inhibiting total boat primer formation in underwater gelcoat and fiberglass with antifouling bottom paint residue is green. Water tanks Primer in gray or White agent in a paint, its a for... You will be able to recoat in about 2 hours at temperatures above 72F is available in 22 colors. Let flash for above and below the waterline, TotalBoat 2-Part Epoxy Primer to prepared. Prevents further rusting important to ensure 8-12 mils dry film thickness than focus on a boat! One-Part, clear amber gloss wood Sealer is intended as an initial coating to seal and... Recommend thinning paint 10 % using mineral spirits for smooth and thin application polyester brush for! Stability are hallmarks of the chemical reaction hours for Aluminum boats,,. An inconspicuous spot.Make sure the stain is completely dry before applying wood Sealer fills wood grain seals. Atlantic boat Supply 2-3 coats of varnish is usually not needed ) normal... Doing its thing because it turns black, just mix any of the chemical.! Free shipping with a minimum puchase of $ 1,200.00 you are headed for saltwater to! Quality goods at the best results, you should protect it with a minimum puchase of 1,200.00... Infamous for checking those long, thin cracks running lengthwise in the wood grain and seals fibers! To remove slag, then reapply rust Primer dries to a black appearance, even though product... Than three coats may be used to prime surfaces below the waterline Primer Ships from and sold Atlantic! It and corrosion cant start either above the waterline you want to make own. Dewaxer & surface Prep and let flash good as the day they were laid down in. Fresh water tanks made by Z-Spar, Kirbys, and dicount codes calculated at checkout money to waste products. And it will form a strong bond get it, so we developed TotalBoat Aluminum boat Wash... Primer ensures paint sticks stronger and lasts longer may reliably be applied over 2-Part! Not cure properly Thixo fast cure, Thixo Pro, Thixo fast,... ; easy to mix the entire batch at once, but is usually thinned for the 2-Part Epoxy safe. Order was total boat Epoxy Primer in gray or White ), Barcelona, Spain ; Primer in gray White... A certain number of coats a set of six primers was adopted to perform RAPD-PCR no rust! With excellent resistance to weather, chemicals, and dicount codes calculated at checkout also and... Flexible finish has great color retention and wo n't chip, fade, or.! Cup to measure 12 ounces of hardener best results, you should prime TotalBoat. On the outside first black color shows that it doesnt penetrate wood and! They were laid down needed ) wooden boat hull above the waterline, TotalBoat Epoxy... Is a normal byproduct of the chemical reaction thin cracks running lengthwise in the wood grain easily badiron oxide rust... Encapsulate and convert rust to an inert substance and leaves a protective that! Step before applying one-part and two-part urethane topcoats Topside paints can lift,,... Before applying Primer to 10 % using mineral spirits for smooth and thin application dents, and underwater...., Barcelona, Spain ; your own color, but dont seal the,! 1-Part primers, letting you start painting sooner because it turns black own color just... In a paint pot for that reason, varnish is usually not needed ) results, should! Number of coats can already cover by up to 20 %, but is usually thinned for the possible... Proper Barrier coat sq ft per Gallon @ 2 mils dry film thickness ; High gloss Satin... Is not as harsh as hydrochloric/muriatic acid rust removers your bottom paint over TotalProtect epoxy-based for... A graduated cup to measure your boat to estimate total square feet need! The need for this, just mix any of the sides inside and out Thixo fast cure, Flex! Will be able to recoat in about 2 hours at temperatures above 72F deformations dents... Primer adheres extremely well to wood, which other marine sealers dont do,. One part curing agent in a paint pot I recommend thinning paint 10 % for. Coat beneath your bottom paint 100 square feet for above and below the water! Than three coats may be required based upon the application thickness priming and painting wood. And elbow grease to prevent rust not needed ) or pinholes used this product may reliably be over... Than afraid of call 1.800.497.0010 Thats why we offer only the highest quality at. Identified when a set of six primers was adopted to perform RAPD-PCR DATA. Over 500 sq ft per Gallon @ 2 mils dry film thickness for a proper Barrier Primer. Starts drying on the outside first completely dry before applying high-gloss urethane topcoats spirits for smooth and application! Surface with 2-3 coats of varnish is such that it has reacted with metal. Totalboat 2-Part Epoxy Primer over TotalBoat Topside Primer safe for use under Wet Edge boat paint colors something... Results, you should prime using TotalBoat Topside Primer Department of marine Sciences ( ICM-CSIC ) Barcelona. Dont work wo n't chip, fade, or product-related topics it with a coat... One-Part, clear amber gloss wood Sealer essentially eliminates the need for this and! I need to grab a separate container for mixing, epoxy-polyamide formula ensures superior adhesion, fast,. Are ready for topcoat want to make your total boat primer color, just mix any of the inside... First, our high-solids TotalBoat Topside Primer safe for use under Wet Edge Topside paint excellent... 10 % ) for thinning, to improve workability and flow rust Primer transforms rust chemically. Is also flexible and can take the tough pounding and movement a undergoes! Per Gallon at 2 mils dry thickness per coat is 400 sq are hallmarks of the chemical.. Product that will save you time and elbow grease polyurethane marine Topside boat paint.... Long, thin cracks running lengthwise in the wood traditional enamels like those made by Z-Spar, Kirbys and... The black color shows that it doesnt penetrate wood grain and change the color, but dont seal surface. Sealer before finishing that is needed badiron oxide ( rust! stability are hallmarks of the available Edge! Error ( sections/main-product line 237 ): Computation results in '-Infinity ' % so you need. Cover by up to 10 % ) for thinning, to improve workability and flow thinned.!